LP100 Etch Primer
Limco LP100 Etch Primer is chromate free and has excellent adhesion properties that work equally well on steel, aluminum and galvanized steel. When applied over bare steel, LP100 is an effective rust inhibitor. Limco LP100 can be primed over with any approved Limco undercoat except H1000. Limco LP100 should also not be used under waterborne primers or peroxide-cured body fillers.
LP20 Epoxy Primer
LP20 Epoxy Primer is a two part epoxy primer for use as a primer under H1000, LP610 or LP620 (low VOC), or under 800K, 846, PS21nr, LS800 or LS56 (National Rule), as a primer-surfacer or as a wet-on-wet sealer under Limco topcoats. LP20 offers excellent adhesion and corrosion protection when used over steel, aluminum, zinc coated or galvanized metals. LP20 can be applied over cured, cleaned and sanded paint finishes (except acrylic lacquers).
LP610 Low VOC Primer
Limco LP610 Low VOC Primer is a quick cure, sandable primer that provides good sand scratch filling with excellent adhesion and topcoat holdout. It is a 2.1 VOC compliant performance primer that provides good filling properties. May be flexed with 892 Flex Agent.
LP620 Low VOC Primer
Limco LP620 Low VOC Primer is a quick cure, sandable primer that provides good sand scratch filling with excellent adhesion and topcoat holdout. It is a 2.1 VOC compliant performance primer that provides good filling properties. LP620 used as a sealer can be flexed with 892 Flex Agent.