563-808 Sand Fix Paste
A wax and silicone-free flattening paste. Used to prepare panels that will be blended into. Eliminates the need to sand blend-in areas with fine sandpaper. Sand Fix Paste is water thinnable.
568-408 Black Primer Tint Paste
Black tint paste that can be used with Glasurit National Rule and epoxy primers. Helps promote better hiding which translates to the use of less top coat.
580-100 Anti-Silicone Additive
A fisheye preventer for use in 22-Line Urethane Topcoat and 923-Clearcoats. Should only be used when absolutely necessary.
583-660 Low VOC Etch Activator (use with 283-155)
Low VOC Etch Activator (use with 283-155)
700-10 Waterborne Degreaser
700-10 is used to clean surfaces to be refinished. Removes silicone, grease and wax residues from surfaces as well as mold release agents from plastic surfaces. When cleaning plastic surfaces, the cleaner produces an anti-static effect and thus reduces dust settling.
700-7 Coagulating Powder
700-7 Coagulating Powder is used to cleanly and economically dispose of excess waterborne paint. 700-7 minimizes the cost of disposing excess paint by precipitating the solids out and leaving residual liquid that can be used for gun cleaning. Then, the dry solid waste can be disposed of in the same manner as spray booth filters.
800K 2K Primer Surfacer
Limco 800K 2K Primer Surfacer is a very fast curing, easy sanding primer or wet-on-wet sealer, that provides good sand scratch filling, no settling in the can, excellent adhesion and topcoat holdout. May be flexed with 892 Flex Agent.
801 Metal Conditioner
R-M 801 Metal Conditioner is a metal etching, acid type of cleaner which leaves an adherent phosphate coating. For use on bare steel and aluminum to clean and mildly etch the metal prior to priming. Improves adhesion and minimizes rust creepage resulting in a more durable finish. It is used to neutralize soldering flux; remove light rust; promote adhesion of subsequent coatings. R-M 801 is also non-flammable.