139 Final Wash
139 is a mild cleaning solvent for use prior to paint application. It removes hand prints, sanding residue and eliminates sand scratch swelling.
151 Waterborne Cleaner
The 151 Cleaner is ideal for removing light contamination from existing paint films, clean-sanded OEM finishes, most unpainted plastic parts and gel-coated fiberglass. It comes ready for use as packaged with no reduction required. This product applies as easily as other cleaners, requiring only a clean towel for wiping on and drying off.
203 Wax and Grease Remover
203 is a blend of specially formulated solvents designed to remove most surface contaminants such as silicone, wax, grease, tar and road film. 203 also causes a slight softening action on existing paint which provides better bonding and adhesion of succeeding coats.
800K 2K Primer Surfacer
Limco 800K 2K Primer Surfacer is a very fast curing, easy sanding primer or wet-on-wet sealer, that provides good sand scratch filling, no settling in the can, excellent adhesion and topcoat holdout. May be flexed with 892 Flex Agent.
892 Flex Agent
Limco 892 Flex Agent is a urethane additive that gives flexibility to Limco Undercoats, Topcoats and Clearcoats. Limco 892 is formulated to resist fading, stone chipping and chemical staining while increasing the durability and flexibility of most interior and exterior parts.
H1000 1K Waterborne Primer
Limco H1000 1K Waterborne Primer is a grey, 1K Low VOC Waterborne System that is fast drying, easy sanding and provides excellent adhesion with good color holdout.
LA20 Epoxy Primer Activator
Epoxy Primer Activator
LA25 Low VOC Epoxy Primer Activator
Low VOC Epoxy Primer Activator
LC4000 Clearcoat (High Solids Version)
Limco LC4000 Clearcoat (High Solids Version) is an acrylic urethane clear for use over Limco Supreme PLUS Basecoat colors. It is designed to increase the profitability and productivity of the repair facility. It is U.S. National Rule compliant, easy to apply and has excellent gloss and leveling.
LC4100 High Solids Clearcoat
Limco LC4100 High Solids Clearcoat is a U.S. National Rule Compliant acrylic urethane clear for use over Limco Supreme PLUS basecoat colors. It is designed to increase the profitability and productivity of the repair facility. LC4100 is an easy to apply two coat clear that has excellent gloss and leveling. LC4100 offers a range of reducers to meet your temperature needs.